Acoustic and vibration analyzers
	Strain measurement
	Data acquisition systems
	Programs
	Vibration control system

Online consultants

604427326 - Natalia 388828835 - Maria

Home / Support / Feature stories

Print version

	Sonar measurements Sonar is another area where our products have found application
	Bearing diagnostics How much longer will the bearing function compared with how long it has been in operation? When did the first defect appear? What caused it - gap measurement, lack of lubrication or increased vibration? The diagnostics system will provide answers to these and many other questions
	Construction vibration Studying vibration during the construction of residential, industrial or commercial premises is one of the most important stages of construction. The seismic activity of the ground must be studied in order to determine the security parameters of neighboring buildings and develop techniques to reduce vibration levels at the construction site
	Accelerometer calibration methods The values of the frequency and acceleration amplitude of mechanical vibrations are usually set to the standard or recommendation followed in the calibration.
	Process control in test cells The system is designed to manage and monitor the processes in the test cells when testing the effects of temperature, pressure, humidity and other climatic and physical factors on products.
	Power quality control The power quality control system is designed to measure electric power and monitor power quality in accordance with GOST 13109-97 "Electric power, compatibility of electromagnetic equipment, quality standards applicable to power in general-purpose power supply systems".
	Measurement of the vibrational and acoustic characteristics of products Set of equipment for measuring and regulating noise and vibration levels during vibroacoustic bench testing under various operating conditions of the equipment being tested to determine compliance with technical requirements.
	Things to keep in mind when using vector vibroaccelerometers Our sensor is distinctive because it uses only one sensing element (i.e., there is only one measurement point) in the form of a rectangular parallelepiped made from a piezoelectric crystal of a certain symmetry and orientation.
	Piezoelectric accelerometers A piezoelectric accelerometer is a vibration sensor that emits an AC signal. From the law of conservation of energy it follows that energy cannot be obtained from the output of any device (including an accelerometer) unless energy is present at the input of the device
	Gear diagnostics Gear diagnostics to detect defects, prevent their occurrence and evaluate their residual life in real-life operating conditions or conditions as close as possible to real life.
	Vibration sensor checking (calibration) system The system is designed for checking and calibration ofР’В accelerometers on a shaker or shock installation by comparison with an exemplary sensor
	Leak detection and monitoring system A system for monitoring, detection and localization of leaks of liquid and gaseous products from pipelines and detection of external mechanical effects on them by the acoustic emission method
	Construction noise Any construction of residential or non-residential premises is accompanied by increased noise. The noise of construction equipment operation can cause certain inconveniences to people in the area, particularly when the equipment is in close proximity to residential buildings. There are sanitary rules and regulations governing allowable levels of noise in the daytime and at night. The described measurements were taken at night in order to determine the real level of noise in the operation of the construction equipment
	Measuring vibrations in food production Monitoring vibration parameters is a must at any production facility, especially when it involves human health. We took one of these measurements at a baking plant in Moscow